OEM 2019–2022 Chevrolet Silverado 1500 Crew Cab Running Boards Left and Right Step Set 84511376

---

OEM 2019–2022 Chevrolet Silverado 1500 Crew Cab Running Boards – Left and Right Step Set (84511376)

Product Highlights

The step height on a 2019 through 2022 Silverado 1500 is high enough that daily entry and exit becomes a real consideration for a significant portion of drivers and passengers. Factory Silverado running boards address that step height while protecting the rocker panels from the road debris, gravel, and mud that the rear tires throw up during regular use. When factory running boards get damaged, corrode from road salt exposure, or disappear from a truck that was purchased without them, finding a proper OEM replacement is the most straightforward path to restoring the factory appearance and functionality.

OEM Silverado running boards sourced from verified donor trucks provide the factory mounting geometry, step surface finish, and end cap design that the receiving truck was built around. Chevrolet Silverado running boards in the aftermarket exist in a wide range of quality levels. Factory original components from the correct generation and cab configuration eliminate the fitment adjustment and finish mismatch issues that aftermarket alternatives introduce at the mounting points and end cap transitions.

At McClain Auto Part, we carry this OEM running board set under part number 84511376 for the 2019 through 2022 Silverado 1500 Crew Cab. Condition details and photos are available before you commit to a purchase.

Product Overview

This listing covers a complete left and right OEM running board step set for the 2019 through 2022 Chevrolet Silverado 1500 Crew Cab. Part number 84511376 is the factory GM part number for this specific running board application. Both the driver side and passenger side boards are included as a matched set from the same donor vehicle.

The Silverado Crew Cab running boards in this set run the full length of the Crew Cab door sill from the front door leading edge to the rear door trailing edge. This full-length coverage provides a step surface at both the front and rear door positions. That full coverage matters on a Crew Cab truck where rear passenger access is part of the regular daily use pattern.

The Silverado side steps in this listing are direct replacement assemblies designed for the factory mounting locations on the 2019 through 2022 T1 generation Silverado 1500 Crew Cab. The mounting bracket positions, clip locations, and step surface dimensions all match the original installation geometry of the receiving truck when confirmed for the correct cab configuration and model year.

Fitment and Compatibility

Several variables determine whether this running board set fits a specific Silverado correctly.

Part Number 84511376

The 84511376 running board part number covers the 2019 through 2022 Chevrolet Silverado 1500 Crew Cab application. Part number verification is one of the most reliable fitment confirmation methods for OEM GM running boards. If you have access to your truck’s original factory running board part number, cross-referencing against 84511376 confirms compatibility before ordering.

Model Year Range

This set fits the 2019 through 2022 model year window within the T1 generation Silverado 1500. The T1 generation launched for the 2019 model year with updated mounting provisions that differ from the previous K2 generation. Confirm your specific model year falls within the 2019 through 2022 window before ordering. The 2019 Silverado 1500 running boards and 2022 Silverado 1500 running boards in this generation use the same factory mounting provisions throughout the production window.

Crew Cab Configuration

This set is cut for the Crew Cab body style specifically. Crew Cab and Double Cab running boards differ in length and bracket spacing because the door sill dimensions differ between the two cab configurations. This set does not fit the Double Cab or Regular Cab Silverado. Confirm your cab configuration as Crew Cab before ordering.

Trim Level Considerations

Running board finish and design details can vary between trim levels within the same model year and cab configuration on the Silverado 1500. Confirm the trim level of your truck against the donor vehicle trim level when you contact us. We provide this information before the order processes to prevent finish mismatches at the end caps and step surface edges.

Direct Replacement Fitment

Direct replacement running boards sourced from the correct part number, model year, and cab configuration install at the factory mounting locations without bracket modification, drilling, or clip adaptation. The factory mounting provisions on the 2019 through 2022 Silverado 1500 Crew Cab align with the donor board mounting provisions when the part number and cab configuration are confirmed as matching.

VIN Verification

Share your VIN before ordering. We cross-reference the 84511376 application against your specific truck to confirm generation, cab configuration, and any trim-level specific mounting provisions before the order processes.

OEM Quality and Function

Every running board in this set is factory original from a verified 2019 through 2022 Chevrolet Silverado 1500 donor truck. The step surface construction, mounting bracket integrity, and end cap finish all reflect factory GM production specifications.

Factory running boards on the T1 generation Silverado use slip-resistant step surface textures engineered for daily use in wet, muddy, and icy conditions. The step surface on a factory OEM side step handles real-world daily conditions consistently. Aftermarket step surface materials frequently use thinner construction and less aggressive texture patterns that wear faster under sustained daily use and provide less reliable footing in adverse weather conditions.

The factory truck steps on this generation also provide rocker panel protection from road debris thrown up by the rear tires during regular driving. This protection benefit accumulates over time on trucks driven in gravel, road salt, and off-road conditions where rocker panel exposure to debris is a consistent factor. Truck entry steps that mount at the factory rocker panel position intercept a meaningful portion of that debris before it contacts the body panels directly.

Shipping and Availability

OEM 2022 Silverado 1500 running boards under part number 84511376 ship nationwide from our Cleveland, Ohio facility. Local pickup is available for buyers who want to inspect the boards in person before taking delivery. Local delivery is available in select areas around Cleveland.

Availability varies based on current donor vehicle inventory. When you contact us, provide your year, model, cab configuration, and VIN. We confirm current availability and match the correct running board set to your truck before anything ships.

Before You Order

Confirm your model year within the 2019 through 2022 window, cab configuration as Crew Cab, and trim level before reaching out. Request photos of the step surface condition, end caps, and bracket mounting points before committing to a purchase. Availability changes as donor vehicles come through our Cleveland facility.

Contact our team with your year, model, cab configuration, and VIN. We confirm fitment and part number compatibility before anything ships.

McClain Auto Part. Cleveland, Ohio. OEM Chevy truck parts shipped nationwide. In business since 2009.