2019-2022 Chevy Silverado 2500/3500 HD LT Front Bumper

2019–2022 Chevy Silverado 2500HD and 3500HD LT Front Bumper OEM Replacement

The front bumper on a 2022 Chevy Silverado Bumper is a structural and functional component, not just a cosmetic piece. It integrates with the tow hooks, the fog light system, the parking sensors on equipped trucks, and the lower grille structure. On a heavy-duty truck that regularly tows, hauls, or operates in commercial environments, the front bumper takes more real-world contact than it does on a light-duty application. When that contact produces damage that repair cannot address cleanly, a correct OEM replacement is the starting point for restoring the truck to factory spec. At McClain Auto Part, we source OEM front bumpers for 2019 through 2022 Silverado 2500HD and 3500HD LT trucks from verified donor vehicles at our Cleveland, Ohio warehouse. Every unit goes through a hands-on inspection before it ships.

Silverado 2500HD and 3500HD LT front bumper replacement comes up for a consistent range of reasons. A low-speed collision that bends the upper mounting bracket and cracks the fog light pocket edges. Road salt penetration that works into the steel mounting structure over several winters until the bracket integrity is compromised. A towing contact event that bends the bumper face and deforms the tow hook openings. Cracked plastic lower trim sections from road debris or parking contact. In each case, the owner needs a replacement that mounts correctly to the factory frame points, clears the tow hooks correctly, and integrates with the fog light and sensor systems the same way the original did.

The LT trim level on the 2019 through 2022 Silverado HD uses a specific bumper configuration that differs from the base WT trim and from the higher LTZ and High Country applications in fog light pocket geometry, sensor hole placement, and finish treatment. A correct OEM Silverado HD bumper assembly from a matching LT donor truck delivers factory-correct fitment on all of those variables without the adjustment and shimming that a non-LT unit or an aftermarket alternative typically requires.

Key Features

OEM front bumper assembly for 2019 to 2022 Silverado 2500HD and 3500HD LT

Sourced from verified low mileage donor Silverado HD LT trucks

Tow hook openings confirmed and inspected before shipping

Fog light pocket geometry confirmed for LT trim configuration

Parking sensor cutouts confirmed where applicable before shipping

Factory mounting bracket integrity inspected on every unit

Chrome or painted finish documented before packaging

Steel substrate inspected for rust penetration at mounting areas

Bumper face inspected for bends and impact deformation

Protective freight packaging on every unit

Tracking provided on every order

Ships nationwide from Cleveland, Ohio

Most orders processed within 1 to 3 business days

Why OEM Fitment Matters on a Silverado HD Bumper

The Chevrolet Silverado 2500 and 3500 front bumper on the 2019 through 2022 generation carries more functional load than a light-duty bumper. The tow hook pass-through openings need to align correctly with the frame-mounted tow hooks. The mounting bracket geometry needs to be precise for the bumper to sit flush against the front of the truck without gaps at the fender and hood interface. The fog light pockets need to position the assemblies at the correct angle for both output performance and visual integration with the lower grille design.

Aftermarket bumpers for the Silverado HD are available at lower price points, but most use looser tolerances at the mounting bracket positions, thinner steel in the bracket construction, and fog light pocket geometry that requires modification to achieve correct assembly positioning. On a working heavy-duty truck where the bumper takes real load regularly, those compromises produce fitment and durability issues that an OEM unit avoids entirely.

LT Trim Configuration Specifics

The LT trim bumper on the 2019 through 2022 Silverado HD uses a specific fog light pocket design, a specific sensor hole configuration on equipped trucks, and a specific finish treatment that differs from both the base WT trim and the higher-tier LTZ and High Country bumpers. The WT trim uses a different lower valance design. The LTZ and High Country use a more refined chrome finish treatment and in some cases different sensor provisions. Installing a non-LT bumper on an LT truck produces visible mismatches at the fog light interface and in some cases functional problems with sensor positioning.

Chrome Versus Painted Finish on the HD

The 2019–2022 Silverado 3500HD LT front bumper comes in chrome finish and painted configurations depending on the specific equipment package. Chrome finish is standard on most LT applications. Some fleet-spec or commercial LT trucks use a painted or brush-textured finish. Confirming the correct finish for your specific truck before ordering prevents a visible mismatch against the grille and fender trim components.

Condition and Inspection Process

Every Silverado LT front bumper replacement unit that ships from our Cleveland warehouse goes through a hands-on inspection before packaging.

What We Check Before Every Unit Ships

Bumper face inspected for bends, dents, and previous impact repair evidence

Chrome or painted finish inspected for peeling, pitting, and surface damage

Steel substrate at mounting brackets inspected for rust penetration

Tow hook openings inspected for deformation and correct alignment

Mounting brackets inspected for bends, cracks, and correct geometry

Fog light pocket edges inspected for cracks and correct geometry

Parking sensor holes inspected for damage and correct placement

Upper mounting points inspected for integrity and correct spacing

Overall bumper profile checked for straightness and dimensional accuracy

Finish condition, tow hook area condition, and mounting bracket condition are documented separately on every unit. You receive that documentation before the order is finalized.

Fitment and Compatibility

2019 to 2022 Silverado HD Production Range

This OEM bumper covers the full 2019 through 2022 Silverado 2500HD and 3500HD production run in LT trim configuration. Confirm your production year and trim level before ordering.

Silverado 2500HD Fitment

The 2019 Chevy Silverado front bumper in LT configuration uses consistent mounting geometry across this production range. Confirm your trim level and finish configuration before ordering.

Silverado 3500HD Fitment

The Silverado 3500HD LT front bumper OEM shares the same front bumper architecture as the 2500HD across the 2019 through 2022 production range on matching trim levels. Single rear wheel and dual rear wheel configurations use the same front bumper. Confirm your trim level and finish before ordering.

Tow Package Compatibility

Tow hook openings are present on all standard tow-package equipped Silverado HD trucks across this production range. The tow hook opening dimensions and clearance geometry are consistent across tow-equipped LT applications. Confirm your tow package configuration when you call.

Parking Sensor and Fog Light Confirmation

Front parking sensors are available on certain LT equipment packages in this production range. Fog light openings are standard on the LT trim. Confirm your sensor configuration and fog light equipment before ordering. We verify both against your specific application before any unit ships.

VIN Confirmation Before Ordering

Call us with your VIN before ordering. Your VIN confirms production year, HD model, trim level, finish configuration, and factory equipment in one step. This eliminates the most common fitment issues before they become a problem after the bumper ships.

Shipping Information

Every Silverado HD front bumper ships on a secured freight pallet with protective wrapping on all chrome or painted surfaces and corner protection at both ends. Steel mounting bracket areas receive additional padding to prevent contact damage during transit. Most orders are processed within 1 to 3 business days after confirmation and payment. Tracking is provided once the unit leaves our facility. We ship to all 50 states from Cleveland, Ohio.

About McClain Auto Part

We have been sourcing and selling OEM heavy-duty truck parts out of Cleveland, Ohio since 2009. Over 10,000 units shipped. Rated 4.9 out of 5 stars across 800 or more verified Google reviews. Every unit we sell sits physically in our Cleveland warehouse and our team inspects it before it ships.

When you call us about a Chevy HD truck front bumper replacement, you speak directly with someone who understands the LT trim fitment differences across the Silverado HD production range, knows the tow hook and sensor configuration variables, and gives you accurate condition information about the exact unit in current inventory.

Frequently Asked Questions

Will This Fit My 2021 Silverado 2500HD LT?

Yes, for 2021 Silverado 2500HD LT applications with finish configuration confirmation. Call us with your VIN and we confirm the correct unit before the order is finalized.

Is This the LT Trim Bumper?

Yes. This unit is confirmed as an LT trim configuration bumper from a matching donor truck. It is not a WT, LTZ, or High Country unit. Confirm your trim level before ordering.

Does It Have Tow Hook Openings?

Yes. Tow hook openings are present and inspected on every unit before shipping. Opening condition and alignment are documented as part of the standard inspection.

Does It Include Fog Lights?

No. The bumper includes the fog light pockets and mounting provisions. Fog light assemblies are not included. Confirm fog light requirements separately when you call.

Is This OEM or Aftermarket?

This is a genuine OEM bumper sourced from a verified donor Silverado 2500HD or 3500HD LT truck in the 2019 through 2022 production range. It is not an aftermarket reproduction.

Can You Verify Fitment Before Shipping?

Yes. Call us with your VIN before ordering. We confirm trim level, finish configuration, tow hook provisions, sensor cutouts, and bumper condition before the order is finalized.

Ready to Order

If you are looking for a 2019–2022 Chevy Silverado 2500HD front bumper or a Silverado 3500HD LT front bumper OEM replacement, call us before ordering. Confirm your VIN, trim level, finish configuration, and tow package equipment. We will tell you exactly what we have in stock, the finish and bracket condition on the specific unit, and the shipping timeline from our Cleveland warehouse.

Silverado HD LT front bumper inventory moves consistently for this production range. If you have questions about trim fitment, finish matching, or tow hook configuration before committing, ask them first.

McClain Auto Part. Cleveland, Ohio. In business since 2009.