2018 RAM 3500 Laramie DRW Diesel 4×4 Front Bumper with Lights & Sensors

2018 RAM 3500 Laramie DRW Diesel 4×4 Front Bumper Assembly with Lights and Sensors. OEM Unit #5222.

This is a complete OEM front bumper assembly removed from a 2018 RAM 3500 Laramie dual rear wheel diesel 4×4. The assembly includes the factory parking sensors and front lighting components as equipped on the donor truck. If you own a 2018 RAM 3500 and need a front bumper replacement after a collision, parking damage, or sensor and lighting failure that makes individual component repair impractical, this is the type of complete OEM assembly that gives you everything in one verified unit rather than sourcing the bumper, sensors, and lights separately and hoping the configurations match. At McClain Auto Part, we have been sourcing and supplying OEM heavy-duty RAM truck parts out of Cleveland, Ohio since 2009. Stock number 5222 is available now and goes through our standard inspection process before it ships.

Front bumper replacement on a RAM 3500 heavy-duty diesel comes up for a range of reasons. A collision that damages the bumper face, bends a mounting bracket, and cracks a sensor housing makes individual repair impractical when a complete donor assembly is available. Parking damage that cracks the lower fascia and breaks a fog light housing creates the same situation. Towing contact that bends the bumper and damages the sensor array is another common scenario on these trucks, which get used for exactly the kind of heavy towing the platform was built for. In each case, a complete OEM assembly that includes the sensors and lights already in place is a more practical and more reliable starting point than piecing together a repair from multiple individual components.

The Laramie trim on the 2018 RAM 3500 uses a specific front bumper configuration that differs from lower trim levels in chrome treatment, fog light placement, and sensor hole count and position. Matching the correct trim configuration on a replacement bumper is not optional on this truck if you want the lights and sensors to integrate correctly with the factory systems.

Key Features

Complete OEM front bumper assembly, stock number 5222

Removed from a 2018 RAM 3500 Laramie DRW Diesel 4×4 donor truck

Factory parking sensors included with the assembly

Front lighting components included, condition documented

Laramie trim-specific chrome finish and fog light configuration

Heavy-duty OEM steel and chrome construction

Factory mounting points, direct bolt-on for matching 2018 RAM 3500 Laramie DRW application

Chrome surface condition inspected and documented before packaging

Sensor positions inspected and confirmed before shipping

Mounting bracket integrity checked before packaging

Oversized freight shipping with protective chrome surface wrapping

Tracking provided on every order

Ships nationwide from Cleveland, Ohio

Most orders processed within 1 to 3 business days

Why a Complete OEM Assembly Makes Sense on an HD Diesel Truck

The front bumper on a RAM 3500 diesel integrates with more systems than most owners realize until something goes wrong with it. The parking sensors feed the factory display and warning system. The fog lights run through the factory lighting control module. The adaptive cruise radar on equipped trucks mounts to a specific bracket position within the bumper assembly. When a collision or impact damages the bumper, the practical question is not just whether the bumper face needs replacing. It is whether the sensor brackets, the light housings, and the fog light geometry are all still correct.

A complete donor assembly that includes the working sensors and lights eliminates that question. You receive one unit where all of those components were installed and functioning in the original truck configuration.

Why OEM Fits Better Than Aftermarket on the RAM 3500

Aftermarket chrome bumpers for the RAM 3500 are available, but the chrome plating quality, mounting bracket geometry, and sensor hole placement on lower-cost aftermarket units rarely match the OEM specification precisely. On a heavy-duty diesel truck where the sensors and lights need to integrate with the factory systems, bracket position variance matters more than it does on a simpler vehicle. An OEM donor assembly from a matching RAM 3500 Laramie DRW positions every sensor, every light housing, and every mounting point at the factory specification because it came off the same production line as the original.

DRW and Diesel Configuration Specifics

The dual rear wheel configuration on the 2018 RAM 3500 does not directly affect the front bumper specification. The front bumper design on DRW and SRW 3500 trucks is the same across matching trim levels. However, the diesel powertrain configuration does affect some front end components on this generation, including the intercooler duct routing near the lower bumper opening. Confirm your powertrain configuration when you call and we verify the assembly matches your specific truck.

Laramie Trim Fitment Considerations

The Laramie trim on the 2018 RAM 3500 uses a chrome-finished front bumper with Laramie-specific fog light pocket geometry and sensor hole placement that differs from the Tradesman and SLT trim levels. A Tradesman bumper does not correctly substitute for a Laramie bumper on the same production year. The chrome sections, fog light openings, and sensor positions are different enough to be visible after installation. Stock number 5222 is a Laramie-specific assembly and fits Laramie trim applications on the 2018 RAM 3500.

Condition and Inspection Process

Stock number 5222 went through a hands-on inspection at our Cleveland warehouse before listing. Every OEM front bumper assembly we ship goes through the same process.

What We Check on Every Unit

Chrome surface inspected across the full face for peeling, bubbling, pitting, and scratches

Steel substrate at mounting brackets inspected for rust and structural integrity

Mounting brackets inspected for bends, cracks, and correct geometry

Parking sensor housings inspected for damage and correct position within the assembly

Sensor wiring pigtails inspected for condition and connector integrity

Fog light housings inspected for cracks, correct position, and lens condition

Tow hook openings inspected for deformation and correct alignment

Overall assembly profile checked for straightness and dimensional accuracy

Chrome condition, sensor condition, and light housing condition documented separately

You receive condition documentation on stock number 5222 before the order is finalized. If any aspect of the documented condition does not meet your requirements, tell us before committing and we advise on what else is available.

Fitment and Compatibility

2018 RAM 3500 Laramie Fitment

Stock number 5222 fits 2018 RAM 3500 Laramie applications directly. This is a Laramie trim-specific assembly. Installing this assembly on a non-Laramie 2018 RAM 3500 will produce visible trim mismatches at the fog light openings and chrome sections. Confirm your trim level before ordering.

DRW Versus SRW Fitment

As noted above, DRW and SRW 3500 trucks use the same front bumper across matching trim levels. This assembly fits both DRW and SRW 2018 RAM 3500 Laramie applications. Confirm your trim level and year before ordering.

Parking Sensor Compatibility

The parking sensors included with this assembly are the factory OEM units from the donor truck. They connect to the factory parking sensor wiring harness on a matching 2018 RAM 3500 Laramie application. If your truck has a different sensor configuration than the Laramie standard, confirm the sensor count and placement before ordering. We verify sensor compatibility before shipping.

Fog Light Compatibility

The fog light housings included with this assembly are the factory OEM units from the donor truck. They connect to the factory fog light wiring on a matching 2018 RAM 3500 Laramie application. Confirm your fog light configuration when you call.

Confirming Fitment Before Ordering

Call us with your VIN and reference stock number 5222 before ordering. Your VIN confirms production year, trim level, and equipment configuration. We confirm fitment, sensor compatibility, and assembly condition before the order is finalized.

Shipping Information

Stock number 5222 ships on a secured freight pallet with chrome surface wrapping on all finished surfaces. Sensor wiring pigtails and fog light housings receive additional protective wrapping before palletizing. The assembly processes and ships within 1 to 3 business days after confirmation and payment. You receive a tracking number once it leaves our facility. We ship to all 50 states from Cleveland, Ohio.

About McClain Auto Part

We have been sourcing and selling OEM heavy-duty RAM truck parts out of Cleveland, Ohio since 2009. Over 10,000 units shipped. Rated 4.9 out of 5 stars across 800 or more verified Google reviews. Every unit we sell sits physically in our Cleveland warehouse and our team inspects it before it ships.

We are not a listing aggregator or broker. When you call us about stock number 5222 or any other RAM 3500 front bumper assembly, you speak directly with someone who understands heavy-duty RAM fitment differences across trim levels, knows the DRW and diesel configuration specifics on this platform, and gives you accurate condition information about the exact unit in inventory.

Frequently Asked Questions

Will This Fit My 2018 RAM 3500 Laramie?

Yes. Stock number 5222 is a direct-fit OEM assembly for the 2018 RAM 3500 Laramie. Call us with your VIN and reference 5222 and we confirm the fitment match before the order is finalized.

Are the Parking Sensors Included?

Yes. The factory OEM parking sensors from the donor truck are included with this assembly. Sensor condition is documented before shipping.

Are the Lights Included With the Bumper?

Yes. The factory fog light housings and front lighting components from the donor truck are included with stock number 5222. Light housing condition is documented before shipping.

Is This OEM or Aftermarket?

This is a genuine OEM assembly removed from a 2018 RAM 3500 Laramie DRW diesel 4×4 donor truck. It is not a reproduction or aftermarket replacement.

Can You Verify Fitment Before Shipping?

Yes. Call us with your VIN and reference stock number 5222. We confirm trim level, sensor configuration, and assembly condition before finalizing the order.

Does This Fit Both SRW and DRW Trucks?

Yes. The front bumper design on the 2018 RAM 3500 Laramie is the same across SRW and DRW configurations. Confirm your trim level before ordering.

What Is the Chrome Condition?

Chrome condition is inspected and documented before shipping. You receive specific condition notes on stock number 5222 before the order is finalized. If the documented condition does not meet your standards, tell us and we advise on other available units.

Ready to Order

If you are looking for a front bumper assembly for a 2018 RAM 3500 Laramie DRW diesel, call us and reference stock number 5222. Confirm your VIN, trim level, and sensor and lighting equipment configuration. We will walk you through the assembly condition, confirm fitment for your specific truck, and provide the shipping timeline from our Cleveland warehouse.

Reference stock number 5222 when you call. If you have questions about sensor compatibility or want additional photos before committing, ask us before ordering.

McClain Auto Part. Cleveland, Ohio. In business since 2009.