Ford F-150 2017 Rear Bumper HL3Z17D826G Used 0940

2017 Ford F150 Rear Bumper Assembly OEM HL3Z-17D826-G | McClain Auto Part

Product Overview

This is a genuine OEM rear bumper assembly for the 2017 Ford F-150, carrying part number HL3Z-17D826-G. This specific unit carries condition code 0940 and was pulled from donor vehicle VIN 1FTEW1EG5HKE46631, a 2017 F-150 with internal reference C26107. The donor VIN is documented and available for verification before purchase, giving you direct traceability to the exact vehicle this bumper came from.

Sourcing a rear bumper with a documented donor VIN provides a level of configuration confidence that unlisted used parts cannot match. The donor VIN confirms the exact model year, trim level, option packages, and factory equipment that were present on the truck this bumper came from. Consequently, cross-referencing that donor configuration against your truck’s VIN before ordering is the most reliable fitment verification available for a used OEM rear bumper on this platform.

The 2017 F-150 sits within the thirteenth-generation platform that ran from 2015 through 2020. Rear bumper configurations on this generation vary by tow package, sensor equipment, trim level finish, and step pad provisions. This bumper has been inspected at our Cleveland, Ohio facility and condition is documented before shipping. Additional photos are available on request before you commit to an order.

Key Features

Genuine OEM Ford F-150 rear bumper assembly
Part Number HL3Z-17D826-G
Condition Code 0940
Donor VIN 1FTEW1EG5HKE46631 documented
Internal Reference C26107
Fits 2017 Ford F-150
Thirteenth-generation F-150 platform
Original factory mounting geometry retained
Mounting tabs and attachment points inspected
Sensor provisions confirmed where applicable
Tow package provisions contact for confirmation
Paint and finish condition documented before shipping
Ships from Cleveland, Ohio
Most orders processed within 1 to 3 business days
6-month warranty included

Product Specifications

Donor VIN Documentation

This rear bumper was pulled from a specific documented donor vehicle. The donor VIN is 1FTEW1EG5HKE46631, an internal reference C26107. This documentation is available for your review before purchasing.

Knowing the donor VIN matters for rear bumper sourcing on the 2015 to 2020 F-150 because rear bumper configuration varies significantly across trim levels, tow packages, and option packages on this generation. The donor VIN allows us to decode the exact factory configuration of the truck this bumper came from, including trim level, tow package, sensor equipment, and finish treatment. Cross-referencing that against your truck’s VIN before ordering consequently provides the highest available confidence in configuration compatibility.

Contact us with your truck’s VIN and we compare your factory configuration against the documented donor vehicle configuration before anything ships. This step eliminates the most common rear bumper fitment errors on this platform before the order is placed.

Condition Code 0940

Condition code 0940 is our internal grading reference for this specific unit. This code documents the condition assessment assigned to this bumper during our inspection process at the Cleveland facility. We use standardized condition codes across our inventory to provide consistent and trackable condition documentation for each unit we list.

Contact us for the full condition details associated with code 0940 on this specific bumper, including paint condition assessment, any noted chips or scratches, step pad condition, and mounting hardware status. We provide photos corresponding to all documented condition areas before you commit to an order.

About the 2017 F-150 Rear Bumper

The 2017 F-150 sits within the thirteenth-generation aluminum-body platform that ran from 2015 through 2020. This generation introduced significant changes from the prior generation including the aluminum body construction and updated powertrain options. The rear bumper assembly on this generation reflects the updated rear-end design language that carried through the full 2015 to 2020 production run.

Part number HL3Z-17D826-G identifies this as a specific rear bumper configuration for the 2017 F-150. The H prefix in the part number indicates the 2017 model year designation within Ford’s part numbering system. This part number is model year specific and does not universally apply across the full 2015 to 2020 generation range, making year-specific confirmation important when sourcing a rear bumper for this platform.

The 2017 F-150 rear bumper consequently differs in part number from adjacent model years even within the same thirteenth-generation platform in some trim and equipment configurations. Providing your VIN allows us to confirm whether this specific part number is the correct rear bumper for your truck.

OEM Fitment Advantages

This OEM rear bumper came off a 2017 F-150 built to the same factory specifications as yours. The mounting tab positions, bracket attachment geometry, sensor port locations, step pad provisions, and tow package clearances reflect Ford’s original engineering for this specific configuration.

Rear bumper replacement on the 2015 to 2020 F-150 is one of the more configuration-sensitive applications we handle. Tow package trucks carry rear bumpers with distinct receiver clearance geometry and step pad configurations compared to non-tow trucks. Sensor-equipped trucks require bumpers with the correct sensor port positions. Trim level finish treatments vary from painted configurations on higher trims to satin black or chrome on others. An OEM unit from a documented donor vehicle consequently provides the most reliable configuration match for this application.

Condition and Inspection Report

This rear bumper assembly has been inspected at our Cleveland, Ohio facility before listing.

Finish Condition

Finish condition is documented under condition code 0940. Contact us for detailed photos and full condition notes before purchasing. We provide close-up images of the full bumper surface including any noted chips, scratches, or areas of finish wear.

Step Pad Area

Step pad condition was assessed during inspection. Contact us for photos and condition notes on the step pad zone before ordering.

Mounting Tabs and Brackets

All mounting tabs and bracket attachment points were inspected for bends, cracks, and missing hardware. Mounting structure integrity was confirmed before listing.

Sensor Provisions

Sensor port positions were inspected for damage, deformation, and completeness. Contact us with your VIN before ordering and we confirm sensor provision compatibility against your truck’s factory equipment.

Tow Package Provisions

Tow hitch receiver clearance and surrounding reinforcement structure were inspected. Contact us with your VIN before ordering and we confirm tow package provision compatibility against your truck’s factory configuration.

Structural Integrity

The rear bumper assembly, reinforcement attachment zones, and mounting geometry were inspected for impact damage, cracks, and deformation. No structural issues were identified on this unit.

Vehicle Compatibility

This rear bumper assembly fits the following primary application:

2017 Ford F-150

This part number is specific to the 2017 model year F-150 within the thirteenth-generation platform. While the 2015 to 2020 F-150 shares the same basic platform architecture, rear bumper part numbers vary by model year within this generation. This specific part number HL3Z-17D826-G is designated for the 2017 model year application.

The thirteenth-generation 2015 to 2020 F-150 is distinct from both the prior twelfth-generation 2009 to 2014 platform and the current fourteenth-generation 2021 and newer platform. This rear bumper is consequently not compatible with F-150 trucks from any other generation regardless of trim level.

Always provide your VIN when you contact us. The VIN comparison against the documented donor VIN 1FTEW1EG5HKE46631 provides the most reliable configuration compatibility confirmation available for this specific unit before anything ships.

Shipping Information

This rear bumper assembly ships nationwide from our Cleveland, Ohio warehouse via freight carrier. Rear bumper assemblies are packed securely before handoff to the carrier and arrive in the same condition they left our facility following inspection and pre-ship documentation.

Most orders are processed and ready to ship within 1 to 3 business days of purchase. You receive a tracking number as soon as the order ships. Local pickup is also available for buyers in the Cleveland area by prior arrangement.

Contact us at +1(216) 230-5433 or sales@mcclainautopart.com with any shipping questions before ordering.

About McClain Auto Part

James McClain founded McClain Auto Part in Cleveland, Ohio in 2009. For over fifteen years we have been sourcing, inspecting, and shipping OEM truck parts to mechanics, body shops, fleet managers, and truck owners across all 50 states. We carry a 4.9 out of 5 star rating on Google from over 800 verified reviews. Every part we list is physically in our Cleveland warehouse, already inspected, and ready to ship. When you call us you talk to someone who knows the F-150 platform across all generations and can answer real questions about fitment, condition, and compatibility.

Frequently Asked Questions

Will This Fit My 2017 Ford F-150

This rear bumper is sourced from and designated for the 2017 Ford F-150. Trim level, tow package, and sensor configuration variations affect exact compatibility. Provide your VIN and we compare your truck’s factory configuration against the documented donor VIN 1FTEW1EG5HKE46631 before anything ships.

What Is the Donor VIN for This Bumper

The donor VIN is 1FTEW1EG5HKE46631, internal reference C26107, a 2017 Ford F-150. This documentation allows us to decode the exact factory configuration of the truck this bumper came from and cross-reference it against your truck’s VIN before ordering.

What Is Condition Code 0940

Condition code 0940 is our internal grading reference documenting the condition assessment assigned to this bumper during inspection. Contact us for the full condition details, photos, and notes associated with this code before purchasing.

Will This Fit a 2016 or 2018 F-150

This part number HL3Z-17D826-G is designated for the 2017 model year. Rear bumper part numbers can vary between model years within the same generation on the 2015 to 2020 F-150. Provide your VIN and we confirm whether this specific part number is the correct rear bumper for your 2016 or 2018 truck before ordering.

Is the Donor VIN Available for My Review

Yes. The donor VIN 1FTEW1EG5HKE46631 is documented and available for your review before purchasing. Contact us and we provide the full donor vehicle configuration details decoded from this VIN so you can compare it against your truck’s configuration.

Does This Work With My Tow Package

Tow package configuration affects rear bumper provisions and receiver clearance on the 2017 F-150. Provide your VIN and we confirm tow package compatibility between this donor unit and your specific truck’s factory configuration before ordering.

Can Fitment Be Verified Before Shipping

Yes. Provide your VIN when you contact us and we compare your truck’s factory configuration against the documented donor VIN before anything ships. This is the most reliable fitment verification available for this specific unit.

Do You Ship Nationwide

Yes. We ship this rear bumper to all 50 states from our Cleveland, Ohio warehouse. Most orders are processed within 1 to 3 business days and you receive a tracking number as soon as the order ships.

Before You Order

Provide your VIN when you contact us so we can compare your truck’s factory configuration against the documented donor VIN 1FTEW1EG5HKE46631, confirm condition code 0940 documentation, and answer any fitment questions before you commit to the purchase.

Call us at +1(216) 230-5433 or email sales@mcclainautopart.com.