rear bumper cover face bar assy for 2017- 2026 Ford F-250 F-350 Super Duty

2017-2026 Ford F-250 F-350 Super Duty Rear Bumper Cover Face Bar Assembly OEM | McClain Auto Part

Product Overview

This is a genuine OEM rear bumper cover face bar assembly for the 2017 to 2026 Ford F-250 and F-350 Super Duty. It is the correct factory replacement for Super Duty trucks across this extended model year range covering both the 2017 redesign generation and the current 2023 generation that launched with comprehensive exterior updates.

The face bar is the primary visible rear bumper component on the Super Duty. It covers the full width of the truck’s rear end and integrates with the step pad, tow provisions, and sensor ports on equipped configurations. Sourcing the correct face bar requires matching the specific trim level, finish configuration, tow package equipment, and sensor provisions from the donor vehicle to your truck’s original factory specification.

This assembly spans a wide production window. The 2017 to 2022 generation and the 2023 to 2026 generation carry distinct rear bumper architectures that do not directly interchange with each other. Consequently, VIN verification before ordering is not just recommended on this listing — it is required. Your VIN tells us exactly which generation, trim level, and configuration this specific face bar assembly needs to match before anything ships.

This bumper was removed from a donor Super Duty and our team inspected it at our Cleveland, Ohio facility before listing. Condition is documented before shipping and additional photos are available on request before you commit to an order.

Key Features

Genuine OEM Ford Super Duty rear bumper cover face bar assembly
Fits 2017 to 2026 Ford F-250 and F-350 Super Duty
Covers 2017 redesign generation and current 2023 generation
Original factory mounting geometry retained
Mounting tabs and attachment points inspected
Step pad area inspected
Tow package provisions contact for confirmation
Sensor provisions contact for confirmation
Finish configuration contact for confirmation
VIN verification required before ordering
Bumper condition documented before shipping
Ships from Cleveland, Ohio
Most orders processed within 1 to 3 business days
6-month warranty included

Product Specifications

Two Distinct Generations Within This Listing

The 2017 to 2026 production window covered by this listing spans two distinct Super Duty generations. Understanding which generation your truck belongs to is the most critical fitment step before ordering.

2017-2022 Super Duty Generation

The 2017 redesign introduced a completely new Super Duty exterior including a distinct rear bumper architecture. This generation’s face bar assembly reflects the 2017 design language and carries specific mounting geometry, sensor provision locations, and step pad integration that are particular to this six-year production run. Front and rear bumper components from this generation do not interchange with the prior 2008 to 2016 generation or with the current 2023 generation.

2023-2026 Super Duty Generation

The 2023 Super Duty launched a comprehensive exterior redesign that introduced updated rear bumper architecture across all trim levels. The 2023 and newer face bar assembly carries updated mounting geometry, revised sensor provision positioning, and a distinct profile compared to the 2017 to 2022 generation. These two generations are consequently not interchangeable in either direction.

Your VIN is the only reliable way to confirm which generation your truck belongs to and which specific face bar assembly configuration is correct for your Super Duty. Always provide your VIN when you contact us before ordering.

Face Bar Assembly: What Is Included

The face bar is the primary structural and aesthetic rear bumper component visible from behind the truck. On the Super Duty, the rear bumper face bar assembly typically includes the main face bar panel, step pad provisions, tow hitch receiver clearance geometry, and sensor port provisions where equipped.

This listing covers the face bar assembly as removed from the donor vehicle. Contact us before ordering to confirm exactly which components are included with this specific unit, including step pad condition, tow hook provisions, and any sensor port hardware present.

Finish and Trim Configuration

The 2017 to 2026 Super Duty rear bumper face bar appeared across multiple finish configurations depending on the trim level. Chrome appeared on XLT, Lariat, King Ranch, and Platinum configurations. Painted body color appeared on higher appearance package configurations. Satin black and natural steel appeared on base XL work truck applications.

The specific finish on this unit reflects the donor vehicle’s trim level. Contact us with your VIN before ordering and we confirm the finish configuration along with photos of the bumper surface. We provide close-up images of the finish condition and any notable wear areas before you commit to an order.

Tow Package Considerations

Rear bumper face bar configuration on both Super Duty generations varies significantly by tow package equipment. Trucks equipped with the factory tow package carry face bars with distinct hitch receiver clearance geometry and step pad provisions compared to non-tow configurations.

Provide your VIN before ordering and we confirm tow package provision compatibility between this unit and your truck’s factory tow equipment. This step is particularly important for buyers who regularly use their truck for towing and depend on correct rear bumper hitch clearance.

Sensor Provisions

Both the 2017 to 2022 and 2023 to 2026 Super Duty generations offered factory rear parking sensor systems on equipped configurations. These require correctly positioned sensor port provisions in the rear bumper face bar. Installing a face bar without the correct sensor port positions eliminates factory parking assist function on sensor-equipped trucks.

Contact us with your VIN before ordering and we confirm rear sensor provision configuration on this specific unit against your truck’s factory equipment. That step eliminates sensor compatibility issues before the order ships.

OEM Fitment Advantages

This OEM face bar assembly came off a Super Duty built to the same factory specifications as yours. The mounting tab positions, bracket attachment geometry, step pad provisions, sensor port locations, and bumper profile reflect Ford’s original engineering for the specific generation and configuration of the donor vehicle. As a result, it installs at the factory mounting locations without modification.

Rear bumper face bar replacement on the Super Duty is one of the more configuration-sensitive applications we handle due to the variety of finish treatments, tow package provisions, and sensor configurations across this extended model year range. An OEM unit from a verified donor configuration consequently provides the most reliable factory-correct result available for this application.

We verify the donor vehicle configuration against your VIN before this face bar ships. That step confirms generation alignment, trim level compatibility, finish configuration, tow package provisions, and sensor compatibility before anything leaves our warehouse.

Condition and Inspection Report

Our team inspected this rear bumper face bar assembly at our Cleveland, Ohio facility before listing.

Finish Surface

Surface finish condition is documented before shipping. Contact us for detailed close-up photos of the full bumper face bar surface before purchasing. We provide images of any notable chips, scratches, corrosion, or finish wear areas before you commit to an order.

Step Pad Area

Our team assessed the step pad surface for cracking, surface wear, and damage consistent with regular use. Step pad condition is documented and included in the photo package available on request.

Mounting Tabs and Brackets

All mounting tabs and bracket attachment points were checked for bends, cracks, and missing hardware. The mounting structure is intact and correctly positioned for direct factory installation.

Tow Package Provisions

Our team inspected the tow hitch receiver clearance and surrounding reinforcement structure. Contact us with your VIN before ordering and we confirm tow package provision compatibility against your truck’s factory configuration.

Sensor Provisions

Sensor port positions were checked for damage, deformation, and completeness. Contact us with your VIN before ordering and we confirm sensor provision compatibility against your truck’s factory equipment.

Structural Integrity

Our team inspected the face bar assembly, reinforcement structure, attachment zones, and mounting geometry for impact damage, cracks, and deformation. No structural issues were identified on this unit.

Vehicle Compatibility

This rear bumper cover face bar assembly fits the following vehicles:

2017 Ford F-250 Super Duty
2018 Ford F-250 Super Duty
2019 Ford F-250 Super Duty
2020 Ford F-250 Super Duty
2021 Ford F-250 Super Duty
2022 Ford F-250 Super Duty
2023 Ford F-250 Super Duty
2024 Ford F-250 Super Duty
2025 Ford F-250 Super Duty
2026 Ford F-250 Super Duty
2017 Ford F-350 Super Duty
2018 Ford F-350 Super Duty
2019 Ford F-350 Super Duty
2020 Ford F-350 Super Duty
2021 Ford F-350 Super Duty
2022 Ford F-350 Super Duty
2023 Ford F-350 Super Duty
2024 Ford F-350 Super Duty
2025 Ford F-350 Super Duty
2026 Ford F-350 Super Duty

This face bar is not compatible with the prior 2008 to 2016 Super Duty generation or with any earlier Super Duty platform. Confirm your model year falls within the 2017 to 2026 window and provide your VIN before ordering so we can identify the correct generation and configuration for your specific truck.

Shipping Information

This rear bumper face bar assembly ships nationwide from our Cleveland, Ohio warehouse via freight carrier. Rear bumper assemblies are packed securely before handoff to the carrier and arrive in the same condition they left our facility.

Most orders are processed and ready to ship within 1 to 3 business days of purchase. You receive a tracking number as soon as the order ships. Local pickup is also available for buyers in the Cleveland area by prior arrangement.

Contact us at +1(216) 230-5433 or sales@mcclainautopart.com with any shipping questions before ordering.

About McClain Auto Part

James McClain founded McClain Auto Part in Cleveland, Ohio in 2009. For over fifteen years we have been sourcing, inspecting, and shipping OEM truck parts to mechanics, body shops, fleet managers, and truck owners across all 50 states. We carry a 4.9 out of 5 star rating on Google from over 800 verified reviews. Every part we list is physically in our Cleveland warehouse, already inspected, and ready to ship. When you call us you talk to someone who knows the Super Duty platform across all generations and can answer real questions about fitment, condition, and compatibility.

Frequently Asked Questions

Will This Fit My 2021 Ford F-250 Super Duty

Yes. This face bar assembly covers the 2017 through 2026 Ford F-250 and F-350 Super Duty. However, the 2017 to 2022 and 2023 to 2026 generations carry distinct rear bumper architectures. Provide your VIN and we confirm the correct generation and configuration for your specific truck before anything ships.

Is This a Genuine OEM Part

Yes. This is a genuine OEM Ford rear bumper cover face bar assembly. It is not an aftermarket reproduction. The factory mounting geometry and configuration reflect Ford’s original manufacturing specifications for the applicable generation.

What Is the Difference Between the 2017-2022 and 2023-2026 Face Bar

The 2023 Super Duty redesign introduced updated rear bumper architecture with revised mounting geometry, sensor provision positioning, and a distinct profile compared to the 2017 to 2022 generation. These two configurations do not interchange. VIN verification is the only reliable way to confirm which generation applies to your truck.

Will This Fit the Prior 2008-2016 Super Duty

No. The 2017 redesign introduced a completely new rear bumper architecture. This face bar is consequently not compatible with any Super Duty produced before the 2017 model year.

What Finish Does This Face Bar Have

The finish reflects the donor vehicle’s trim level configuration. Common finishes across this range include chrome, painted, satin black, and steel. Contact us for photos and finish confirmation before ordering.

Does This Work With My Tow Package

Tow package configuration affects face bar geometry and hitch clearance. Provide your VIN and we confirm tow package provision compatibility between this unit and your truck’s factory tow equipment before ordering.

Can Fitment Be Verified Before Shipping

Yes. Provide your VIN when you contact us and we cross-reference your truck’s model year, generation, trim level, tow package, and factory configuration against this face bar before anything ships. VIN verification is required rather than optional on this listing given the two-generation production window.

Do You Ship Nationwide

Yes. We ship this face bar assembly to all 50 states from our Cleveland, Ohio warehouse via freight carrier. Most orders are processed within 1 to 3 business days and you receive a tracking number as soon as the order ships.

Before You Order

VIN verification is required before this face bar ships. Provide your VIN when you contact us so we can confirm your truck’s generation, trim level, finish configuration, tow package provisions, and sensor compatibility before you commit to the purchase.

Call us at +1(216) 230-5433 or email sales@mcclainautopart.com.