87-97 Ford F150 F250 F350 Rear Step Bumper

1987-1997 Ford F-150 F-250 F-350 Rear Step Bumper OEM | McClain Auto Part

Product Overview

This is a genuine OEM rear step bumper for the 1987 to 1997 Ford F-150, F-250, and F-350. It is the correct factory replacement for full-size Ford truck owners maintaining or restoring a truck from this classic generation across this eleven-year production window.

The 1987 to 1997 Ford F-Series trucks represent two distinct but closely related generations of the iconic full-size Ford truck. The eighth-generation F-Series covered 1987 to 1991, introducing updated styling from the prior generation. The ninth-generation launched for 1992 and ran through 1996 before the tenth-generation OBS trucks arrived for 1997. The fact that this listing spans these generation boundaries makes VIN verification and model year confirmation essential before ordering. Rear bumper components from different generation years within this range may not interchange universally across the full eleven-year window without specific confirmation.

The rear step bumper on this generation F-Series is among the most recognizable exterior components of the classic Ford truck era. The integrated step provides functional bed and cab access on a full-size truck while the bumper face bar provides rear-end protection across the full truck width. Clean OEM rear step bumpers for trucks of this vintage are increasingly difficult to source as the platform ages. This bumper consequently represents a meaningful sourcing opportunity for restorers, collectors, and owners keeping these classic trucks in service.

This bumper was removed from a donor F-Series truck and our team inspected it at our Cleveland, Ohio facility before listing. Given the age of these components, condition documentation before ordering is particularly important. Full condition photos are available on request before you commit to an order.

Key Features

Genuine OEM Ford F-150 F-250 F-350 rear step bumper
Fits 1987 to 1997 Ford F-150, F-250, and F-350
Spans eighth, ninth, and early tenth-generation F-Series platforms
Integrated step pad
Original factory profile and mounting geometry
Mounting tabs and attachment points inspected
Step pad condition documented before shipping
Chrome or steel finish depending on donor vehicle configuration
Bumper surface condition documented before shipping
Ships from Cleveland, Ohio
Most orders processed within 1 to 3 business days
6-month warranty included

Product Specifications

Generation Context: Three Distinct F-Series Platforms

The 1987 to 1997 production window on this listing spans three distinct F-Series generation boundaries. Understanding which generation your truck belongs to is the most important fitment step before ordering.

1987-1991 Eighth-Generation F-Series

The eighth-generation F-Series introduced updated styling for 1987 that carried forward through 1991. This generation’s rear step bumper reflects the design language and mounting architecture specific to this five-year production run. Rear bumper components from the eighth generation may not interchange directly with ninth-generation components without confirmation.

1992-1996 Ninth-Generation F-Series

The ninth-generation F-Series launched for 1992 with a comprehensive redesign that updated the exterior design language, interior, and mechanical systems. The rear step bumper on this generation reflects the updated styling of the 1992 redesign. While the ninth generation shared some component carryover with the eighth generation in certain areas, rear bumper interchangeability between these two generations requires VIN verification rather than assumed compatibility.

1997 Tenth-Generation F-Series

The 1997 model year introduced the tenth-generation F-Series with a new exterior design. This single-year overlap at the end of this listing’s production window means that 1997 rear bumper components reflect the updated tenth-generation architecture rather than the ninth-generation design. Buyers with a 1997 F-Series should consequently confirm generation-specific compatibility with us before ordering.

F-150, F-250, and F-350 Coverage

This rear step bumper listing covers the F-150, F-250, and F-350 across this production window. The F-150, F-250, and F-350 shared significant rear bumper component overlap on the full-size F-Series platform during this era, making broad model coverage possible within a single listing.

However, cab configuration, bed length, and trim level variations affect rear bumper fitment in some configurations within this range. Regular cab, SuperCab, and crew cab configurations may carry different rear bumper mounting geometry in some model years. Provide your truck’s year, model, cab configuration, and VIN when you contact us and we confirm the correct rear step bumper for your specific truck before ordering.

Integrated Step Pad

The step pad on this rear bumper is one of its most functionally important features for trucks of this era. The integrated step provides a platform for entering the truck bed and accessing items stored in the bed on a tall full-size truck. Step pad condition on a bumper of this age reflects decades of foot traffic use.

Surface wear, minor cracking, and compression marks consistent with regular use are common on step pads from this generation. Our team assessed step pad condition specifically during inspection and the condition is documented before listing. Contact us for photos of the step pad before ordering so you can evaluate its condition against your expectations, particularly for restoration applications where step pad appearance is a priority.

Finish and Surface Condition

Rear step bumpers from the 1987 to 1997 F-Series era are between 28 and 38 years old at the time of this listing. This vintage consequently carries surface condition characteristics that differ fundamentally from more recently produced truck components.

Chrome finish on bumpers of this age commonly carries surface pitting from decades of road exposure, edge peeling at bumper ends and step pad transitions, surface oxidation producing dull or hazy areas, and localized rust blooming where the underlying steel substrate has been exposed. Steel finish bumpers commonly carry surface rust ranging from light oxidation to more advanced corrosion depending on the truck’s climate history and storage conditions.

We document the full surface condition on this specific unit before listing and provide detailed close-up photos of all notable condition areas on request. Contact us before ordering for a complete condition photo package covering the full bumper surface, step pad, and any corroded or worn areas. This documentation step is particularly important for trucks in this age range where surface condition expectations vary significantly between buyers pursuing different end goals, from working driver use to full restoration.

OEM Fitment Advantages

This OEM rear step bumper came off an F-Series truck from this generation built to the same factory specifications. The mounting tab positions, bracket attachment geometry, step pad integration, and bumper profile reflect Ford’s original engineering for this classic F-Series platform. As a result, it installs at the factory mounting locations without modification and maintains the correct factory rear-end profile for a truck of this generation.

Aftermarket rear step bumpers for the 1987 to 1997 F-Series are available but vary significantly in steel thickness, step pad quality, chrome plating depth, and mounting geometry accuracy. As these trucks age, the quality differential between OEM and aftermarket alternatives becomes more apparent. An OEM unit from a verified donor vehicle consequently provides the most authentic and factory-correct result for both restoration and working driver applications.

We verify the donor vehicle generation and configuration against your truck’s information before this bumper ships. That step confirms generation alignment, cab configuration compatibility, and surface condition documentation before anything leaves our warehouse.

Condition and Inspection Report

Our team inspected this rear step bumper at our Cleveland, Ohio facility before listing.

Bumper Surface

Surface condition is documented consistent with a vintage 1987 to 1997 era part. Contact us for detailed close-up photos of the full bumper surface, including any notable rust, pitting, chrome wear, or structural observations, before purchasing.

Step Pad

Our team assessed the step pad for surface wear, cracking, and compression consistent with decades of use. Step pad condition is documented and photos are available on request before ordering.

Mounting Tabs and Brackets

All mounting tabs and bracket attachment points were checked for bends, cracks, rust, and missing hardware. Contact us for the mounting hardware condition assessment before ordering.

Tow Provisions

Tow provision configuration depends on the donor vehicle’s original equipment. Contact us with your truck’s model year, model, and VIN before ordering and we confirm tow provision compatibility.

Structural Integrity

Our team inspected the bumper assembly, reinforcement structure, and mounting geometry for impact damage, bends, cracks, and deformation. Structural assessment results are available with the condition photo package on request.

Age-Related Considerations

This bumper is between 28 and 38 years old. Surface rust on steel components, corrosion at attachment points, chrome deterioration where present, and age-related wear consistent with a vehicle of this era are possible and were evaluated during inspection. Contact us for the full condition assessment and photo documentation before ordering.

Vehicle Compatibility

This rear step bumper fits the following vehicles with noted generation-specific confirmation required:

1987 Ford F-150, F-250, F-350
1988 Ford F-150, F-250, F-350
1989 Ford F-150, F-250, F-350
1990 Ford F-150, F-250, F-350
1991 Ford F-150, F-250, F-350
1992 Ford F-150, F-250, F-350
1993 Ford F-150, F-250, F-350
1994 Ford F-150, F-250, F-350
1995 Ford F-150, F-250, F-350
1996 Ford F-150, F-250, F-350
1997 Ford F-150, F-250, F-350

This bumper is not compatible with the 1998 and newer F-Series platform or with any F-Series produced before 1987. Given the three-generation span of this listing, VIN verification and model year confirmation are required before ordering to ensure the correct generation alignment for your specific truck.

Shipping Information

This rear step bumper ships nationwide from our Cleveland, Ohio warehouse via freight carrier. Vintage rear step bumpers are packed carefully to protect the surface condition during freight transit. The bumper arrives in the same condition it left our facility following inspection and pre-ship documentation.

Most orders are processed and ready to ship within 1 to 3 business days of purchase. You receive a tracking number as soon as the order ships. Local pickup is also available for buyers in the Cleveland area by prior arrangement.

Contact us at +1(216) 230-5433 or sales@mcclainautopart.com with any shipping questions before ordering.

About McClain Auto Part

James McClain founded McClain Auto Part in Cleveland, Ohio in 2009. For over fifteen years we have been sourcing, inspecting, and shipping OEM truck parts to mechanics, body shops, fleet managers, and truck owners across all 50 states. We carry a 4.9 out of 5 star rating on Google from over 800 verified reviews. Every part we list is physically in our Cleveland warehouse, already inspected, and ready to ship. When you call us you talk to someone who knows the classic F-Series platform across all generations and can answer real questions about fitment, condition, and compatibility.

Frequently Asked Questions

Will This Fit My 1993 Ford F-150

Yes. This rear step bumper covers the 1987 through 1997 Ford F-150, F-250, and F-350. However, generation boundaries within this range require confirmation before ordering. Provide your model year, cab configuration, and VIN and we confirm the correct generation alignment for your specific truck before anything ships.

Why Does the Generation Boundary Matter Within This Listing

The 1987 to 1997 F-Series spans three distinct generations with their own rear bumper architecture. Rear bumper components may not interchange universally across all eleven years without specific confirmation. The eighth generation 1987 to 1991, ninth generation 1992 to 1996, and tenth generation 1997 each carry distinct rear bumper characteristics that require generation-specific confirmation before ordering.

Is This a Genuine OEM Part

Yes. This is a genuine OEM Ford rear step bumper removed from a donor F-Series truck. It is not an aftermarket reproduction. The factory step pad integration, mounting geometry, and profile reflect Ford’s original manufacturing specifications for this classic F-Series generation.

What Is the Surface Condition on a Bumper This Old

This bumper is between 28 and 38 years old. Surface condition reflects that age and commonly includes chrome pitting or surface rust depending on the finish, step pad wear, and corrosion at attachment points. Our team documents all condition areas before listing. Contact us for a complete condition photo package before ordering, particularly if this is for a restoration project.

Will This Fit a 1998 or Newer F-Series

No. The 1998 F-Series introduced a new platform and rear bumper architecture. This bumper is consequently not compatible with 1998 and newer trucks.

Will This Fit Both the F-150 and F-250

Yes. The F-150, F-250, and F-350 shared significant rear bumper overlap during this era. Provide your specific model, cab configuration, and VIN and we confirm compatibility for your truck before ordering.

What Finish Does This Bumper Have

Finish reflects the donor vehicle’s original configuration and age. Chrome and steel finish configurations exist across this production range. Contact us for photos and finish confirmation before ordering so you can evaluate the surface condition against your restoration or replacement expectations.

Can Fitment Be Verified Before Shipping

Yes. Provide your truck’s model year, model, cab configuration, and VIN when you contact us. We cross-reference your truck’s generation and configuration against this bumper before anything ships.

Do You Ship Nationwide

Yes. We ship this rear step bumper to all 50 states from our Cleveland, Ohio warehouse via freight carrier. Most orders are processed within 1 to 3 business days and you receive a tracking number as soon as the order ships.

Before You Order

Confirm your model year, truck model, and cab configuration before ordering. Contact us for a complete condition photo package covering the bumper surface, step pad, mounting tabs, and any notable age-related condition areas before committing to the purchase. Generation confirmation via VIN is required on this listing given the three-generation production window.

Call us at +1(216) 230-5433 or email sales@mcclainautopart.com.

Fits: 1987 Ford F150 rear bumper, 1988 Ford F150 rear bumper, 1989 Ford F150 rear bumper, 1990 Ford F150 rear bumper, 1991 Ford F150 rear bumper, 1992 Ford F150 rear bumper, 1993 Ford F150 rear bumper, 1994 Ford F150 rear bumper, 1995 Ford F150 rear bumper, 1996 Ford F150 rear bumper, and 1997 Ford F150 rear bumper. Also compatible with 1987 Ford F250 rear bumper, 1988 Ford F250 rear bumper, 1989 Ford F250 rear bumper, 1990 Ford F250 rear bumper, 1991 Ford F250 rear bumper, 1992 Ford F250 rear bumper, 1993 Ford F250 rear bumper, 1994 Ford F250 rear bumper, 1995 Ford F250 rear bumper, 1996 Ford F250 rear bumper, and 1997 Ford F250 rear bumper, as well as 1987 Ford F350 rear bumper, 1988 Ford F350 rear bumper, 1989 Ford F350 rear bumper, 1990 Ford F350 rear bumper, 1991 Ford F350 rear bumper, 1992 Ford F350 rear bumper, 1993 Ford F350 rear bumper, 1994 Ford F350 rear bumper, 1995 Ford F350 rear bumper, 1996 Ford F350 rear bumper, and 1997 Ford F350 rear bumper