2016-2023 Toyota Tacoma SR5 Rear Chrome Bumper Assembly Without Park Assist OEM | McClain Auto Part
Product Overview
This is a genuine OEM chrome rear bumper assembly for the 2016 to 2023 Toyota Tacoma SR5 without park assist sensor provisions. It is the correct factory replacement for Tacoma SR5 trucks originally equipped with the chrome rear bumper and without the factory rear park assist system across this model year range.
The without-park-assist designation is the most important fitment detail on this listing. On the 2016 to 2023 Tacoma, the rear bumper was produced in configurations with and without rear park assist sensor provisions depending on the trim level and option package. These two configurations are not interchangeable, and installing this without-park-assist bumper on a Tacoma originally equipped with rear park assist consequently eliminates factory sensor function entirely. Providing your VIN before ordering is therefore the most reliable way to confirm your specific Tacoma’s park assist configuration.
The SR5 trim designation additionally carries specific fitment relevance. The 2016 to 2023 Tacoma lineup spans multiple trim levels from base SR through TRD Pro, and each trim level carries specific rear bumper configurations in terms of finish treatment, profile geometry, and step pad design. As a result, the SR5 chrome rear bumper is specific to that trim level and may differ in profile and chrome coverage from TRD Sport, TRD Off-Road, Limited, or TRD Pro configurations on the same platform.
The 2016 model year launched the third-generation Tacoma with a comprehensive exterior redesign that ran through 2023 before the fourth-generation redesign launched for 2024. Our team removed this bumper from a donor Tacoma SR5 and inspected it at our Cleveland, Ohio facility before listing. Chrome surface condition is documented before shipping and additional photos are available on request before you commit to an order.
Key Features
Genuine OEM Toyota Tacoma SR5 rear chrome bumper assembly
Without park assist sensor provisions
Chrome finish, factory OEM
SR5 trim specific configuration
Fits 2016 to 2023 Toyota Tacoma SR5
Third-generation Tacoma platform
Original factory mounting geometry retained
Mounting tabs and attachment points inspected
Step pad area inspected
Chrome surface condition documented before shipping
Tow hitch provisions contact for confirmation
Ships from Cleveland, Ohio
Most orders processed within 1 to 3 business days
6-month warranty included
Product Specifications
| Specification | Details |
|---|---|
| Part Type | OEM Rear Chrome Bumper Assembly |
| Finish | Chrome, factory OEM |
| Trim | SR5 |
| Park Assist | Without sensor provisions |
| Sensor Port Openings | Not present on this unit |
| Condition | OEM Used, Inspected |
| Fits | 2016-2023 Toyota Tacoma SR5 |
| Platform | Third-generation Tacoma |
| Mounting | Factory OEM bracket locations |
| Step Pad | Present, condition documented |
| Tow Hitch Provisions | Contact for confirmation |
| Warranty | 6 months |
| Ships From | Cleveland, Ohio |
| Processing Time | 1 to 3 business days |
| Shipping | Nationwide freight |
| VIN Verification | Required before ordering |
| Seller | McClain Auto Part |
| Website | mcclainautopart.com |
Without Park Assist: Why This Matters
The park assist designation on this listing deserves direct attention before ordering. On the 2016 to 2023 Tacoma, the rear bumper was produced in configurations with and without rear park assist sensor provisions depending on the trim level and option package selected at the time of original purchase.
Trucks equipped with factory rear park assist carry rear bumpers with precisely positioned sensor port openings that allow the ultrasonic proximity sensors to monitor the area behind the truck and provide distance warnings when reversing. The port position, depth, and surrounding geometry are all specific to the sensor system and must align correctly for proper sensor function.
This listing covers the without-park-assist configuration. The rear face of this bumper in the sensor zone is solid with no port openings. Consequently, installing this bumper on a Tacoma originally equipped with rear park assist eliminates factory sensor function entirely. Provide your VIN before ordering and we confirm your specific Tacoma’s park assist configuration to ensure this is the correct unit for your truck.
SR5 Trim Specific Fitment
The SR5 is one of the most popular trim levels in the 2016 to 2023 Tacoma lineup, positioned above the base SR and below the TRD Sport in the trim hierarchy. The SR5 rear bumper consequently carries a specific chrome profile and step pad design that reflects its position in the Tacoma trim structure.
Chrome profile, finish treatment, and step pad design all differ between the SR5 and higher trim configurations including TRD Sport, TRD Off-Road, TRD Pro, and Limited. In some cases, step pad dimensions also vary between these trim levels. As a result, installing an SR5 rear bumper on a TRD or Limited Tacoma produces profile and appearance discrepancies that are immediately visible against the surrounding rear bodywork and trim elements.
For body shops handling collision repair on an SR5 Tacoma, sourcing the correct SR5 trim specific OEM rear bumper is consequently the most direct path to a factory-correct result. We verify donor vehicle trim level against your VIN before this bumper ships.
About the Third-Generation Tacoma Platform
The 2016 model year launched the third-generation Tacoma with the most significant exterior redesign of the nameplate in a decade. The new front and rear styling introduced a more aggressive design language that distinguished the third generation from the prior second-generation Tacoma that ran from 2005 through 2015.
The third-generation rear bumper architecture does not interchange with the second-generation design or with the fourth-generation platform that launched for 2024. Buyers sourcing a rear bumper for a 2016 to 2023 Tacoma consequently need to confirm the correct generation before ordering rather than assuming interchangeability with adjacent production years.
Within the eight-year third-generation production window, minor equipment updates can additionally affect rear bumper component specifications in some configurations and model years. Providing your VIN before ordering is therefore the most reliable confirmation method for this application.
Chrome Surface Condition
Chrome rear bumper assemblies on the 2016 to 2023 Tacoma range from 2 to 9 years old at the time of this listing. Chrome surfaces in this range carry wear consistent with active daily use on a midsize truck. Stone chips from road debris, step pad zone scuffs from regular foot traffic, and edge wear at chrome transitions are all common on used chrome rear bumpers from this generation.
We document the full chrome surface condition on this specific unit before shipping and provide detailed close-up photos of all notable surface areas on request. Contact us before ordering to receive a complete condition photo package covering the chrome surface, step pad zone, and any notable wear areas. That way you can evaluate the finish against your expectations before committing to an order.
OEM Fitment Advantages
This OEM rear bumper assembly came off a third-generation Tacoma SR5 built to the same factory specifications as yours. The mounting tab positions, bracket attachment geometry, chrome component profiles, step pad provisions, and bumper profile all reflect Toyota’s original engineering for the SR5 without-park-assist chrome configuration on this generation. As a result, it installs at the factory mounting locations without modification and integrates correctly with the surrounding quarter panels, tailgate, and lower body trim.
The without-park-assist configuration on this OEM bumper additionally provides a clean solid face in the sensor zone that matches the factory specification for non-park-assist Tacoma SR5 trucks exactly. Aftermarket alternatives vary in how accurately they replicate the factory profile in this zone. An OEM unit from a matching SR5 donor consequently provides the most reliable factory-correct installation result.
We verify the donor vehicle trim level and park assist configuration against your VIN before this bumper ships. That step confirms SR5 trim alignment, park assist configuration, chrome finish compatibility, and tow hitch provisions before anything leaves our warehouse.
Condition and Inspection Report
Our team inspected this rear bumper assembly at our Cleveland, Ohio facility before listing.
Chrome Surface
Our team documented the full chrome surface condition before shipping. Contact us for detailed close-up photos of the chrome surface, step pad zone, and any notable wear areas before purchasing. We provide a complete photo set before you commit to an order.
Park Assist Zone
The rear face of this bumper in the sensor zone was confirmed as the without-park-assist solid configuration. No sensor port openings are present on this unit.
Step Pad Area
Our team assessed the step pad surface for cracking, surface wear, and damage consistent with regular use. Step pad chrome condition is documented and included in the photo package available on request.
Mounting Tabs and Brackets
Our team checked all mounting tabs and bracket attachment points for bends, cracks, and missing hardware. The mounting structure is intact and correctly positioned for direct factory installation on a third-generation Tacoma SR5.
Tow Hitch Provisions
Our team inspected the tow hitch receiver clearance and surrounding reinforcement structure. Contact us with your VIN before ordering and we confirm tow hitch provision compatibility against your Tacoma’s factory configuration.
Structural Integrity
Our team inspected the bumper assembly, reinforcement structure, attachment zones, and mounting geometry for impact damage, cracks, and deformation. No structural issues were identified on this unit.
Vehicle Compatibility
This rear bumper assembly fits the following vehicles:
2016 Toyota Tacoma SR5 without park assist
2017 Toyota Tacoma SR5 without park assist
2018 Toyota Tacoma SR5 without park assist
2019 Toyota Tacoma SR5 without park assist
2020 Toyota Tacoma SR5 without park assist
2021 Toyota Tacoma SR5 without park assist
2022 Toyota Tacoma SR5 without park assist
2023 Toyota Tacoma SR5 without park assist
This bumper is specific to the SR5 trim configuration on the third-generation Tacoma for model years 2016 through 2023 and to trucks not equipped with factory rear park assist. It is not compatible with SR, TRD Sport, TRD Off-Road, TRD Pro, or Limited trim levels without VIN verification confirming interchangeability. Additionally, it does not apply to the prior second-generation Tacoma or the current fourth-generation platform.
Always provide your VIN when you contact us so we can confirm SR5 trim alignment, park assist configuration, and model year before anything ships.
Shipping Information
This rear bumper assembly ships nationwide from our Cleveland, Ohio warehouse via freight carrier. Chrome rear bumper assemblies are packed carefully to protect the finish during freight transit and consequently arrive in the same condition they left our facility.
Most orders are processed and ready to ship within 1 to 3 business days of purchase. You receive a tracking number as soon as the order ships. Local pickup is also available for buyers in the Cleveland area by prior arrangement.
Contact us at +1(216) 230-5433 or sales@mcclainautopart.com with any shipping questions before ordering.
About McClain Auto Part
James McClain founded McClain Auto Part in Cleveland, Ohio in 2009. For over fifteen years we have been sourcing, inspecting, and shipping OEM truck parts to mechanics, body shops, fleet managers, and truck owners across all 50 states. We carry a 4.9 out of 5 star rating on Google from over 800 verified reviews. Every part we list is physically in our Cleveland warehouse, already inspected, and ready to ship. When you call us you talk to someone who knows the Tacoma platform and can answer real questions about fitment, condition, and compatibility.
Frequently Asked Questions
Will This Fit My 2020 Toyota Tacoma SR5 Without Park Assist
Yes. This rear bumper assembly fits the 2016 through 2023 Toyota Tacoma SR5 without rear park assist. Trim level alignment and tow hitch configuration variations affect exact compatibility within this range. Provide your VIN and we confirm the correct configuration for your specific Tacoma before anything ships.
Is This a Genuine OEM Part
Yes. This is a genuine OEM Toyota rear chrome bumper assembly and not an aftermarket reproduction. The factory chrome finish, SR5 specific profile, and mounting geometry all reflect Toyota’s original manufacturing specifications for this configuration.
Why Does the Without Park Assist Designation Matter
The 2016 to 2023 Tacoma rear bumper was produced in configurations with and without rear park assist sensor provisions. These two configurations are not interchangeable, and installing this without-park-assist bumper on a Tacoma equipped with rear park assist consequently eliminates factory sensor function. Provide your VIN and we confirm your Tacoma’s park assist configuration before ordering.
Will This Fit a Tacoma With Park Assist
No. This is specifically the without-park-assist configuration. The rear face of this bumper in the sensor zone is solid with no port openings and is consequently not compatible with Tacoma trucks originally equipped with rear park assist.
Will This Fit Other Tacoma Trim Levels
This bumper is specific to the SR5 trim configuration and may not match the profile, chrome coverage, or step pad design of TRD Sport, TRD Off-Road, TRD Pro, Limited, or base SR configurations. Provide your VIN and we confirm trim level compatibility before ordering.
What Is the Chrome Condition on This Bumper
Chrome surface condition is documented before shipping. Contact us for detailed close-up photos of the full chrome surface, step pad zone, and any notable condition areas before purchasing. We provide a complete photo set before you commit to an order.
Will This Fit the 2024 or Newer Tacoma
No. The fourth-generation Tacoma launched for 2024 with a completely new rear bumper architecture and is consequently not compatible with this bumper regardless of trim level.
Will This Fit the Second-Generation 2005-2015 Tacoma
No. The third-generation Tacoma launched for 2016 with a new rear bumper architecture. This bumper is consequently not compatible with any Tacoma produced before the 2016 model year.
Can Fitment Be Verified Before Shipping
Yes. Provide your VIN when you contact us and we cross-reference your Tacoma’s model year, SR5 trim level, park assist configuration, and tow hitch equipment against this bumper before anything ships.
Do You Ship Nationwide
Yes. We ship this rear bumper assembly to all 50 states from our Cleveland, Ohio warehouse via freight carrier. Most orders are processed within 1 to 3 business days and you receive a tracking number as soon as the order ships.
Confirm your model year, SR5 trim level, and park assist configuration before ordering. VIN verification is required for this application. Provide your VIN when you contact us so we can verify SR5 trim alignment, park assist configuration, and chrome surface condition before you commit to the purchase.
Call us at +1(216) 230-5433 or email sales@mcclainautopart.com.
Quick Links: 2016 Toyota Tacoma Rear Bumper, 2017 Toyota Tacoma Rear Bumper, 2018 Toyota Tacoma Rear Bumper, 2019 Toyota Tacoma Rear Bumper, 2020 Toyota Tacoma Rear Bumper, 2021 Toyota Tacoma Rear Bumper, 2022 Toyota Tacoma Rear Bumper, 2023 Toyota Tacoma Rear Bumper.






















Reviews
There are no reviews yet.